• Iron-Away Topping by Kimberbell (KDST135) prevents stitches from sinking into plush or high-pile fabrics like terrycloth and fleece. The slight texture grips plush fabrics,, and then 10 seconds with the heat of the iron removes it completely with no residue left in the project.
1 1

Kimberbell

Iron-Away Topping (KDST135) by Kimberbell

Iron-Away Topping (KDST135) by Kimberbell

£14.00 GBP
£14.00 GBP
Sale Sold out
Shipping calculated at checkout.

No more sunk stitches with Iron-Away Topping (KDST135)! Kimberbell Specialty Sewing & Embroidery Stabilizers are used with Tear-Away, Cut-Away, and Wash-Away on a wide variety of projects. The Iron-Away Topping prevents stitches from sinking into plush or high-pile fabrics like terrycloth and fleece. The slight texture allows the stabilizer to grip plush fabrics. When you are ready to remove it, just apply heat with an iron and pressing cloth. The stabilizer melts in ten seconds with no residue left on the project.

This product is only available in a 12" x 10 yard roll.

Instructions for use:
Place down before stitching desired stitch. Use Kimberbell paper tape to hold topping in place during embroidery. To remove, pull excess topping away from design. Cover with pressing cloth and gently press with a hot iron for ten seconds. Remaining topping will transfer to the pressing cloth. For smaller detail stitches, a heat tool held one to two inches away from project may be used to melt excess stabilizer.

How to use Specialty Stabilizers:

Description of Kimberbell Specialty Stabilzers and when to use them.
For even more helpful tips and an overview of the available stabilizers from Kimberbell, Click Here.
View full details